MAX. FORMING CAPACITY AT FULL LENGTH -- 9 GAUGE (MILD STEEL)

PER MFG. YEAR: 1999

MAX. LENGTH OF FORMING ---------------- 126"

SMALLEST PERMISSIBLE INNER BEND RADIUS- 1.25 X GAUGE

(FULL WIDTH)

MINIMUM FLANGE HEIGHT ----------------- 6 X GAUGE

CLAMPING BEAM MAXIMUM SPEED UP -------- 3.60"/SECCLAMPING BEAM MAXIMUM SPEED DOWN ------ 1.57"/SEC.

MAXIMUM FOLDING SPEED ----------------- 74 DEGREES/SEC.

FOLDING ANGLE SETTING RANGE ----------- 0 - 180 DEGREES

CNC FOLDING BEAM STROKE --------------- 3.15"

CNC LOWER BEAM STROKE ----------------- 3.15"

CLAMPING BEAM STROKE ------------------ 15.75"

BACKGAUGE POSITIONING ACCURACY -------- +/- .004"

BACKGAUGE MAXIMUM POSITIONING TIME ---- 3 SECONDS

BACKGAUGE MINIMUM POSITION ------------ .394"

BACKGAUGE MAXIMUM POSITION ------------ 61.00"

MOTOR DRIVE POWER --------------------- 12 H.P.

ELECTRICS ----------------------------- 460 VOLTS, 3 PH, 60 HERTZ

AMPERAGE ------------------------------ 50 AMPS

Weight: 12,340 LBS. ; 99" high x 15" length x 8" wide

Stock No. 26494

Sn#117/40