BUY IT NOW
WE ACCEPT BOTH
Automec
|
|
|
BUY IT NOW |
|
Automec |
|
|
CNC 9x9 Autogauge |
|
CNC 9x9 is a simple-to-use 9 bend, single axis system with IN/MM conversion and bend allowance. CNC 9x9 was developed as a low cost solution to be used with Automec's Econogauge. The control carries an extraordinary 5 year warranty. |
| The CNC 9x9 couple with the Econogage
series of Automec back gauges gives the user an economical solution for
single axis backgauge applications. The system can be used for single bend “go to “ positioning or a sequence of up to 9 bends with up to 9 repeats of identical bends can be programmed. The CNC 9x9 retains the same speed, accuracy, and repeatability as provided by Automec’s higher end controls at a more affordable price. The system features bend allowance and inch/mm conversion. CNC 9x9 was developed as a low-cost solution to be used with Automec’s Econogauge line, however it can be ordered with traditional Automec back gauges for a slightly higher price. Features: * Operator can display backgauge position, bend number, and cycles per bend. * Error message appears when unattainable dimensions are entered. * Gauge Offset- all backgauge dimensions can be offset +- .999” with one data entry. * 5-Year control warranty. |
|
|
Mechanical Specifications: |
| Model | CNC 9x9/A | CNC 9x9/MB | CNC 9x9/B or CNC9x9/BP | CNC 9x9/HD or CNC9x9/HDP |
| Holding Force | 200 lbs. | 200 lbs. | 400 lbs. | 400 lbs. |
| Number of Drives | 1 | 1 | 2 | 2 |
| Weight | 200 lbs. | 200 lbs | 300 lbs. | 350 lbs. |
| Overall Height | 26" | 21" | 26" | 26" |
| Overall Depth | 45" | 41" | 45" | 45" |
| Overall Width | 16" | 31" | 40" | 77" |
| Gauge Bar Length | 3' | 5' 5" | 7' | 11' |
| Positioning Speed | 600 IPM | 600 IPM | 600 IPM | 600 IPM |
| Gauge Travel | 24" | 20" | 24" | 24" |
| Repeatability | +- .002" | +- .002" | +- .002" | +- .002" |
| Vertical Height Adj. | 10" | 10" | 10" | 10" |
| Recommended Width | Up to 4' | 5' to 8' 6" | 5' to 8' 6" | 9' to 14' |
| Gauge Bar Type | 2" x 6" Aluminum Extrusion | 2" x 6" Aluminum Extrusion | 2" x 6" Aluminum Extrusion | 2" x 6" Aluminum Extrusion |
| Finger Type | (2) GF-8 | (2) GF-8 | (2) GF-8 | (2) GF-8 |
| Work Blocks | YES | YES | YES | YES |
| Reference Bars | YES | YES | YES | YES |
| Additional Options: |
| DP-4 Pendant Mount Assembly |
| Extra GF-8 or GF-9 Fingers |
| Factory Installation |
| Note: GF-9 Fingers should be substituted for GF-8 fingers on up-stroking press brakes. |
| Note: Specify if backgauge will be mounted in dovetail slot of press brake. |
