Cross Brake
|
Models: S54-22 A) Tennsmith's bench-mounted hand brakes provide an economical means of performing a wide range of sheet metal bending and forming operations. These brakes are of all steel-welded construction, readily adjustable and utilize bronze bearing at pivot points. The S54-22 was specifically designed to perform cross brake material reinforcement on 48 x 24 inch wide material. |
|
| 54" | |
| Maximum lift of beam | 7/8" |
| Front to rear beam adjustment | 1/4" |
| Minimum reverse bend | 5/16" |
| Maximum flange in capacity material | 3/8" |
| Shipping weight | 265 lbs. |
| FLOOR STANDS |
Universal brakes
|
Model:EBT48-16, EBT60-16, EBT72-16 A.) TENNSMITH’S new EBT Series is a versatile machine that allows for the removal and repositioning of both the upper and lower segments for forming complex parts. In addition, the EBT incorporates gas spring cylinders in lieu of traditional counterweights to assist in the bending process and the raising and lowering of the upper beam. The brake also features goat's foot style upper beam tooling. B.) Common Applications Include:
|
|
Universal Brakes |
EBT48-16 |
EBT60-16 | EBT72-16 |
Bending Capacity, mild steel |
16 Gauge | 16 Gauge | 16 Gauge |
| Bending Length | 48-1/8" | 60-1/4" | 72-1/4" |
| Maximum Lift of beam | 4" | 4" | 4" |
| Bending beam adjustment | 1" | 1" | 1" |
| Minimum reverse bend | 5/8" | 5/8" | 5/8" |
| Segmented tooling width | 10,8,6,6,4,2.5,2,1 | 10,8,6,6,4,2.5,2,1 |
10,8,6,6,4,2.5,2,1 |
Max. transverse bend (through tooling centers) |
2-1/4" | 2-1/4" | 2-1/4" |
| Overall Dimensions | 60" x 45-1/2" x 31-1/2" | 72" x 45-1/2" x 31-1/2" | 84" x 45-1/2" x 31-1/2" |
| Shipping Weight | 1000 lbs. | 1150 lbs. | 1300 lbs. |
E-Mail
Phone: 1-888-988-7738 or Fax 513-527-4410
