|
|
JET Large Spindle
Bore Lathes |
|
|
STANDARD FEATURES
* Uniquely designed exclusively by JET*
* ISO 9001 certified manufacturer
* 3-1/8" bore spindle is supported by two
tapered and one ball bearing
* Chrome molybdenum headstock gears
are hardened, ground, and shaved
* Universal gearbox allows inch, metric, diametral,
and module pitch threads, no change gears required
* Carriage features one-shot lubrication and Turcite-B
on bed sliding surfaces •T-slotted compound slide
featuring a four-way tool post
* One-piece cast iron base absorbs vibration allowing
heavier cuts
*High quality ANSI Class 50 wear-resistant cast iron
bed ways are hardened and ground
* Removable gap allows up to 23-5/8" diameter work
* Five position automatic carriage stop increases productivity
* Attractive chrome control levers, dials, and knobs
complete this impressive package
* Tolerance test certificate included
STANDARD EQUIPMENT
10" 3-jaw chuck with top reversing jaws
12" 4-jaw chuck
12" Face plate
Four-way tool post
Follow rest
Large capacity steady rest
Fully integrated coolant system
Full length splash guard and coolant return
Large easy to use foot brake
Articulating halogen work lamp
Centrally located controls with jog button
Threading dial
Mountingpads and levelers
Spindle sleeve (MT-7 to MT-5)
Dead center
Live center
Tool box and adjusting tools |
|
 |
|
| MODEL NUMBER |
DESCRIPTION |
| GH-1440ZX |
14" Swing, 40" Center, D1-8
Camlock Spindle, 7.5HP, 3PH, 230/460V |
| GH-1460ZX |
14" Swing, 60" Center, D1-8
Camlock Spindle, 7.5HP, 3PH, 230/460V |
| GH-1640ZX |
16" Swing, 40" Center, D1-8
Camlock Spindle, 7.5HP, 3PH, 230/460V |
| GH-1660ZX |
16" Swing, 60" Center, D1-8
Camlock Spindle, 7.5HP, 3PH, 230/460V |
| GH-1840ZX |
18" Swing, 40" Center, D1-8
Camlock Spindle, 7.5HP, 3PH, 230/460V |
| GH-1860ZX |
18" Swing, 60" Center, D1-8
Camlock Spindle, 7.5HP, 3PH, 230/460V |
| GH-1880ZX |
18" Swing, 80" Center, D1-8
Camlock Spindle, 7.5HP, 3PH, 230/460V |
