Model 16-18        
A) TENNSMITH's Model 16-18 notcher is a versatile, heavy-duty bench tool for shearing, notching, and piercing work.
B) The heavy cast iron construction allows the notcher to be used to side shear 6 inches of material to its rated capacity; and the throat behind the upper ram is beveled on one side to permit long strips of material to pass without restriction. Notches of more than 90° can be accomplished in two operations. The upper blades can be reversed for a “nose to heel” cutting action; and the ram stroke can be controlled by means of two set screws to permit limited throat piercing and knockout operations. Optional tab blades are available for reinforced box, pan and chassis corners. Front gauges and large surface, ground work table with inlaid scales are standard features.

Notcher
 Model 16-18
Maximum capacity notching, mild steel
16 gauge
Maximum capacity piercing, mild steel
18 gauge.
Notch
6 x 6 in. x 90
Dimensions, handles, removed, L x W x H
19 x 18 15 in.
Shipping weight
170 lbs.
Export crate
5.35 cu. ft
Optional stand, shipping weight
95 lbs.

Replacement Notcher Blades
Model 16-18,  Regular Blades, Set of 4
Model 16-18, Tab Blades, Set of 4

Optional Accessories:


E-Mail

Phone: 1-888-988-7738 or Fax 513-527-4410