Uni-hydro ironworker Model 135-24
Model 135-24 Standard Features
  • Four different workstations can be used without retooling stations
  • Punches and dies can be aligned without lowering machine under power
  • Fixed and adjustable bar shear hold-down
  • Adjustable stroke control
  • Grease bank for lubricating machine with covers in place.
  • Two-stage hydraulic pump
  • Portable electric foot controls
  • Built for forklift handling
  • Two-cylinder design maximizes machine strength, safety and machine life.
Accessories
*punch nut wrench for L series or 150 and 500 series punch nut
*punch rack holds 30 sets of l series punches
*punch table has adjustable jig for high production with accuracy.
*bar shear stop for production shearing up to 24" lengths
*Deluxe back-gauge-for production shearing up to 6-foot lenghts
*Oversize stripper for punching over 2-1/4" round
*Oversize Die stand for punching over 2-1/4"round (specify type and thickness of material to be punched)
*Offset die stand for punching close to the web on angle iron (specify size of angle are largest hole diameter to be punched. also specify how close to the web the hole will be located, measured from the inside)
Optional tooling (punch station)
*square notcher
*coper notcher
*pipe notcher
*Brake: 6" - 24"
Optional tooling (power cavity)
*Brake: 6" - 14"
*Angle Shear
*Channel Shear
*Rod shear (round or square )
*Z & T shear

Uni-hydro Ironworker Model 135-24
Throat Depth (in)

12" - 24"
Punch

1-1/2" hole in 1"   * 4" hole in 3/8"
Bar Shear

1/2" x 24"    &    5/8" x 20"  &  3/4" x 18" & 1" x 12"
Angle Shear 90 degrees: (Slug Type)

6" x 6" x 1/2"
Angle Shear 90 degrees: (Sever Cut)

6" x 6" x 3/8"

Miter Angle 45 Degrees: (Bar Shear)

4" x 4" x 1/2"
Miter Angle 45 Degrees: (Slug Type)

4" x 4" x 3/8"
Channel Shear

2" , 3" , 4" , 5" , 6" , 7" , 8"
Rod Shear (Round Max)

1 - 1/4"
Rod Shear (Square Max)

1 - 1/4"
Coper Notcher 90 Degrees (notcher station)

For 4" x 4" x 5/16" angle
Coper Notcher 90 Degrees (punch or power capacity)

For 4" x 4" x 1/2" angle
Square Notcher (notcher station)

For 3" x 3" x 5/16" angle
Square Notcher (punch or power capacity )

For 3" x 3" x 3/8" angle
Pipe Notcher (Sched 40 or 80)

1/2" , 3/4" , 1", 1-1/4", 1-1/2", 2"
Pipe Notcher (larger size on request)

larger available
Brake

6" or 9",14",18" or 24" capacity
Strokes per Minute (light Material)

40
Strokes per Minute (at max capacity) 8
Hydraulics 3,000 psi
Oil Capacity 28 gallons
Motor (standard) 7-1/2 HP, 3 Phase
Motor (Optional) 7-1/2 HP, 1 Phase
Overall Width: 46"
Overall Length: 79"
Overall Height 91-1/2" , 98"
Overall Bar Shear working Height 32-1/2"
Punch Table Top Height 39"
Cavity Table Top Height 43"
Notcher Station working height 43"
Weight (net) 7220 lbs.

E-Mail