Uni-hydro ironworker Model 66-24
Model 66-24 Standard Features
  • Open Throat Punch has 66-ton capacity
  • 24" bar shear with 4-sided blades can mitre angle iron to 3" x 3" x 5/16"
  • Bar shear hold-down can be fixed or adjustable
  • Variable stroke control
  • Magnetic starter for safety
  • Built for forklift handling
  • Electric foot control
  • Bar shear table
  • Manual punch aligner
  • Slug type angle shear (5"x5"x3/8" or 6"x6"x3/8")      can mitre angle iron (4"x4"x3/8")

 
Accessories
*punch nut wrench for L series or 150 and 500 series punch nut
*Bar shear stop for production shearing up to 24" lengths
*Deluxe back gauge for production shearing up to 6-foot lengths
*punch table with adjustable jig for high production with accuracy
*Grease bank allows lubricating without removing machine covers
*Punch rack holds 30 sets of punches and dies
*steel bin catcher
*Oversize stripper for punching over 2-1/4" round
*Oversize Die stand for punching over 2-1/4" round (specify type and thickness of material to be punched)
*Offset die stand for punching close to the web on angle iron (specify size of angle are largest hole diameter to be punched. also specify how close to the web the hole will be located, measured from the inside)
Optional tooling (punch station)
*square notcher
*coper notcher
*pipe notcher
*Brake: 6"
Optional tooling (power cavity)
*Brake: 6 or 9"
*Angle Shear
*Channel Shear
*Rod shear (round or square )
*Z & T shear

Uni-hydro Ironworker Model 66-24
Throat Depth (in)

9"
Punch

1-5/8" hole in 1/2"     &      2-1/4" hole in 3/8"
Bar Shear

1/4" x 24"    &    3/8" x 22" & 1/2" x 16"  &  3/4" x 10"&1" x 6"
Angle Shear 90 degrees: (Slug Type)

6" x 6" x 3/8" & 5" x 5" x 1/2"
Angle Shear 90 degrees: (Sever Cut)

4" x 4" x 3/8"

Miter Angle 45 Degrees: (Bar Shear)

4" x 4" x 1/2"

Miter Angle 45 Degrees: (Slug Type)

4" x 4" x 3/8"

Channel Shear

2" & 3" Combined or 4"or 5" standard

Rod Shear (Round Max)

1 - 1/4"
Rod Shear (Square Max)

1 - 1/4"
Coper Notcher 90 Degrees

For 4" x 4" x 3/8" angle
Square Notcher

3" x 3" 3/8"
Pipe Notcher (Sched 40 or 80)

1/2" , 3/4" , 1", 1-1/4", 1-1/2", 2"
Brake

6" or 9" x 14" , 18" or 24"
Strokes per Minute (light Material)

50
Strokes per Minute (at max capacity) 9
Hydraulics 2,000 psi
Oil Capacity 16 gallons
Motor (standard) 7-1/2 HP, 3 Phase
Motor (Optional) 7-1/2 HP, 1 Phase
Overall Width: 37"
Overall Length: 46"
Overall Height 70"
Overall Bar Shear working Height 29"
Punch Table Top Height 39 - 1/4"
Cavity Table Top Height 41"
Weight (net) 2,840 lbs.

E-Mail