Uni-hydro ironworker 80-24
Model 80-24 Standard Features
  • Manual punch aligner
  • 80-ton Open Throat Punch
  • 24" bar shear with 4-sided blades
  • Magnetic starter for safety and reliability
  • Fixed and adjustable bar shear hold-down
  • Electric foot control
  • Eyelet and forklift accommodations
  • Variable stroke control
Accessories
*punch nut wrench for L series or 150 and 500 series punch nut
*bar shear stop for production shearing up to 24" lengths
*Deluxe back gauge for production shearing up to 6-foot lengths
*punch table has adjustable jig for high production with accuracy.
*Grease band for lubricating fittings with out removing covers
*Punch rack holds 30 sets of punches and dies
*Bin catches steel dropping from bar shear
*Oversize Die stand for punching over 2-1/4" round (specify type and thickness of material to be punched)
*Oversize stripper for punching over 2-1/4" round
*Offset die stand for punching close to the web on angle iron (specify size of angle are largest hole diameter to be punched. also specify how close to the web the hole will be located, measured from the inside)
Optional tooling (punch station)
*square notcher
*coper notcher
*pipe notcher
*Brake: 6,9,18,24"
Optional tooling (power cavity)
*square notcher
*coper notcher
*Brake: 6, 9 or 14"
*Angle Shear
*Channel Shear
*Rod shear (round or square )
*Z & T shear

Uni-hydro Ironworker Model 80-24
Throat Depth (in)

9"
Punch

2" hole in 1/2"   &  1-3/8" hole in 3/4" &  2-1/4" hole in 7/16"
Bar Shear

1/4" x 24"    &    1/2" x 20"  &  3/4" x 10" & 1" x 6"
Angle Shear 90 degrees: (Slug Type)

6" x 6" x 1/2"
Angle Shear 90 degrees: (Sever Cut)

4" x 4" x 3/8"

Miter Angle 45 Degrees: (Bar Shear)

4" x 4" x 1/2"
Miter Angle 45 Degrees: (Slug Type)

4" x 4" x 3/8"
Channel Shear

2" & 3" combined 4,5 or 6" standard
Rod Shear (Round Max)

1 - 1/4"
Rod Shear (Square Max)

1 - 1/4"
Coper Notcher 90 Degrees (notcher station)

n/a
Coper Notcher 90 Degrees (punch or power capacity)

 For 4" x 4" x 1/2" angle
Square Notcher (notcher station)

n/a
Square Notcher (punch or power capacity)

For 3" x 3" x 3/8" angle
Pipe Notcher (Sched 40 or 80)

1/2" , 3/4" , 1", 1-1/4", 1-1/2", 2"
Brake

6" or 9",14",18" or 24" capacity
Strokes per Minute (light Material)

50
Strokes per Minute (at max capacity) 9
Hydraulics 2,000 psi
Oil Capacity 16 gallons
Motor (standard) 7-1/2 HP, 3 Phase
Motor (Optional) 7-1/2 HP, 1 Phase
Overall Width: 37"
Overall Length: 46"
Overall Height 70"
Overall Bar Shear working Height 29"
Punch Table Top Height 39 - 1/4"
Cavity Table Top Height 41"
Weight (net) 2900 lbs.

E-Mail