Uni-hydro ironworker Model 42-14

Model 42-14 & N42-14 & 42-14SLS            Standard Features
- Manual punch aligner (Models 42-14 and N42-14)
- 6" open throat punch has 42-ton capacity
- 14" bar shear with 4-sided blades
- Bar shear holddown can be fixed or adjustable
- Variable stroke control
- Built for forklift handling
- Magnetic starter for safety and reliability
 
Accessories
- Punch nut wrench for L series punch nut
- Punch rack holds 20 sets of L series punches
- Punch table with adjustable jig for high production with accuracy
- Bar shear stop for production shearing up to 24" lengths
- Bar shear table extends the table from 3" to 12"
- Grease bank allows lubricating without removing machine covers
- Bin for collecting steel dropping from bar shear
- Oversize die stand for punching over 1-3/8" round
(specify type and thickness of material to be punched)
- Oversize stripper for punching over 1-3/8" round
- Offset die stand for punching close to the web on angle iron
Optional tooling (punch station)
*square notcher
*coper notcher
*pipe notcher
*Brake : 6"
Optional tooling (power cavity)
*square notcher
*coper notcher
*Brake 6" or 9"
*Angle Shear
*Channel Shear
*Rod Shear (round or square)
*Z & T Shear

Uni-hydro Ironworker Model 42-14
Throat Depth (in)

6"
Punch

1-1/16" hole in 1/2"     &      1-3/8" hole in 3/8"
Bar Shear

3/8" x 14"    &    1/2" x 10"       &      5/8" x 6"
Angle Shear 90 degrees: (Slug Type)

3" x 3" x 3/8"

Angle Shear 90 degrees: (Sever Cut)

3" x 3" x 1/4"

Miter Angle 45 Degrees: (Bar Shear)

3" x 3" x 3/8"

Miter Angle 45 Degrees: (Slug Type)

2" x 2" x 5/16"
Channel Shear

1" & 2" Combined or 3" standard

Rod Shear (Round Max)

3/4"
Rod Shear (Square Max)

3/4"
Coper Notcher 90 Degrees

For 3" x 3" x 1/4" angle
Square Notcher

1-3/4" x 2" x 1/4"

Pipe Notcher (Sched 40 or 80)

1/2" , 3/4" , 1", 1-1/4", 1-1/2"
Brake

6" or 9" x 1/4"
Strokes per Minute (light Material)

50
Strokes per Minute (at max capacity) 7
Hydraulics 1,000 psi
Oil Capacity 15 quarts
Motor (standard) 3 HP, 3 Phase
Motor (Optional) 3 HP, 1 Phase
Overall Width: 28"
Overall Length: 34"
Overall Height 60"
Overall Bar Shear working Height 29"
Punch Table Top Height 38-1/4"
Cavity Table Top Height 37-1/2"
Notcher Station Working Height 22" (N42-14 Only)
Weight (net) N42-14, 42-14,  42-14SLS 1300 lbs / 1240lbs / 1205lbs

E-Mail