Uni-hydro ironworker Model PRO 56
Model Pro 56 Standard Features
  • Open Throat Punch has 56-ton capacity
  • 14" bar shear with 4-sided blades
  • Bar shear hold-down can be fixed or adjustable
  • Magnetic starter for safety and reliability
  • Built for forklift handling
  • Full up and down stroke control
  • 4th station switch to any of these notcher styles (square, pipe, coper)
  • Notcher of choice comes standard with machine
  • Manual punch aligner
  • Grease bank allows lubrication without removing machine covers
Accessories
*punch nut wrench for L series punch nut
*punch rack holds 20 sets of l series punches
*punch table has adjustable jig for high production with accuracy.
*bar shear stop for production shearing up to 24" lengths
*bar shear table extends the table from 3" to 12"
*Slug type angle shear
*steel bin catcher
*Oversize stripper for punching over 1-38" round
*Oversize Die stand for punching over 1-3/8" round (specify type and thickness of material to be punched)
*Offset die stand for punching close to the web on angle iron (specify size of angle are largest hole diameter to be punched. also specify how close to the web the hole will be located, measured from the inside)
*remote foot control
Optional tooling (punch station)
*square notcher
*coper notcher
*pipe notcher
*Brake: 6"
Optional tooling (power cavity)
*Brake: 6 or 9"
*Angle Shear
*Channel Shear
*Rod shear (round or square )
*Z & T shear

Uni-hydro Ironworker Model Pro 56
Throat Depth (in)

6"
Punch

1-1/4" hole in 1/2"     &      13/16" hole in 3/4"
Bar Shear

3/8" x 14"    &    1/2" x 10"      &     5/8" x 8"  &  3/4" x 6"
Angle Shear 90 degrees: (Slug Type)

3" x 3" x 3/8"

Angle Shear 90 degrees: (Sever Cut)

4" x 4" x 3/8"

Miter Angle 45 Degrees: (Bar Shear)

3" x 3" x 3/8"

Miter Angle 45 Degrees: (Slug Type)

2" x 2" x 5/16"
Channel Shear

2" & 3" Combined or 4" standard

Rod Shear (Round Max)

1 - 1/16"
Rod Shear (Square Max)

1 - 1/16"
Coper Notcher 90 Degrees

For 3" x 3" x 1/4" angle
Square Notcher

1 - 3/4" x 2" x 1/4"

Notching Station Square Notcher

2" x 3" x 3/8"
Pipe Notcher (Sched 40 or 80)

1/2" , 3/4" , 1", 1-1/4", 1-1/2", 2"
Brake

6" or 9" x 1/4"
Strokes per Minute (light Material)

50
Strokes per Minute (at max capacity) 7
Hydraulics 1,200 psi
Oil Capacity 20 quarts
Motor (standard) 5 HP, 3 Phase
Motor (Optional) 5 HP, 1 Phase
Overall Width: 27-1/4"
Overall Length: 33"
Overall Height 57"
Overall Bar Shear working Height 29"
Punch Table Top Height 38 - 1/4"
Cavity Table Top Height 37 - 1/4"
Notcher Station working Height 26"
Weight (net) 1,720lbs.

E-Mail