|
Uni-hydro
ironworker Pro 80 |
Model Pro 80 Standard Features
- Manual punch aligner
- 80-ton Open Throat Punch
- 24" bar shear with 4-sided
blades
- Magnetic starter for safety and reliability
- Fixed and adjustable bar
shear hold-down
- Electric foot control
- Eyelet and forklift accommodations
- Variable stroke control
- 4th station allow notching without retooling
- Grease bank for lubricating fittings without removing covers
|
|
Accessories |
|
*punch nut wrench for L
series or 150 and 500 series punch nut |
|
*bar shear stop for
production shearing up to 24" lengths |
|
*Deluxe back gauge for
production shearing up to 6-foot lengths |
|
*punch table has
adjustable jig for high production with accuracy. |
|
*Punch rack holds 30
sets of punches and dies |
|
*Steel bin catcher |
|
*Oversize Die stand for
punching over 2-1/4" round (specify type and thickness of material to be
punched) |
|
*Oversize stripper for
punching over 2-1/4" round |
|
*Offset die stand for
punching close to the web on angle iron (specify size of angle are largest
hole diameter to be punched. also specify how close to the web the hole
will be located, measured from the inside) |
|
Optional
tooling (punch station) |
|
*square notcher |
|
*coper notcher |
|
*pipe notcher |
|
*Brake: 6,9,18,24" |
|
Optional
tooling (power cavity) |
|
*square notcher |
|
*coper notcher |
|
*Brake: 6, 9 or 14" |
|
*Angle Shear |
|
*Channel Shear |
|
*Rod shear (round or square ) |
|
*Z & T shear |
|
Optional
tooling (4th station) |
|
*Square Notcher |
|
*Coper Notcher |
|
*Pipe Notcher |
|
 |
|
Uni-hydro Ironworker |
Model Pro
80 |
| Throat Depth (in) |
9" |
| Punch |
2" hole
in 1/2" & 1-3/8" hole in 3/4" & 2-1/4" hole in 7/16" |
| Bar Shear |
1/4" x
24" & 1/2" x 20" & 3/4" x 10"
& 1" x 6" |
| Angle Shear 90 degrees: (Slug Type) |
6" x 6" x
1/2" |
| Angle Shear 90 degrees: (Sever Cut) |
4" x 4" x
3/8"
|
| Miter Angle 45 Degrees: (Bar Shear) |
4" x 4" x
1/2" |
| Miter Angle 45 Degrees: (Slug Type) |
4" x 4" x
3/8" |
| Channel Shear |
2" , 3" ,
4" , 5" , 6" |
| Rod Shear (Round Max) |
1 - 1/4" |
| Rod Shear (Square Max) |
1 - 1/4" |
| Coper Notcher 90 Degrees (notcher station) |
3" x 3" x
1/4" |
| Coper Notcher 90 Degrees (punch or power capacity) |
4"
x 4" x 1/2" |
| Square Notcher (notcher station) |
2" x 3" x
3/8" |
| Square Notcher (punch or power capacity) |
3" x 3" x
3/8" |
| Pipe Notcher (Sched 40 or 80) |
1/2" ,
3/4" , 1", 1-1/4", 1-1/2", 2" |
| Brake |
6" or
9",14",18" or 24" capacity |
| Strokes per Minute (light Material) |
50 |
| Strokes per Minute (at max capacity) |
9 |
| Hydraulics |
2,000 psi |
| Oil Capacity |
16 gallons |
| Motor (standard) |
7-1/2 HP, 3 Phase |
| Motor (Optional) |
7-1/2 HP, 1 Phase |
| Overall Width: |
37" |
| Overall Length: |
46" |
| Overall Height |
70" |
| Overall Bar Shear working Height |
29" |
| Punch Table Top Height |
39 - 1/4" |
| Cavity Table Top Height |
41" |
| Weight (net) |
3100 lbs.
|
|
