Uni-hydro plate shears
 All Models                                                            Standard Features
- Single cylinder design
- Even distribution of energy across the blade avoids flexing" of the blade. Minimal adjustable of blade gap had to be made when switching from thin to thick material
- Built for forklift handling or lifting with overhead eyelets.
- Cylinder is center mounted on the blade and uses pivot arms to transfer energy to three pressure points.
          - Independent hydraulic hold-down
- 36" manual back gauge, 24" squaring arm
              - Excellent visibility of cut
    - Electric controls including foot switch
     

Uni-hydro Plate Shear Models 1/4" x 51" 1/4" x 74" 3/8" x 51" 3/8" x 96"
Shear Capacity

1/4" x 51"

1/4" x 74"

3/8" x 51"

3/8" x 96"
Stokes Per Minute (Max)

16

14

15

12
Blade (w/ 4 Cutting Edges)

3/4" x 4" x 51"

3/4" x 4" x 74"

3/4" x 4" x 51"

1" x 4" x 100"
Blade Rake

1-1/4" over 51"

1-13/16" over 74"

1-3/4" over 51"

2-1/2" over 96"
Motor

7-1/2 HP 3- Phase    7-1/2 HP 1- Phase

7-1/2 HP 3- Phase    7-1/2 HP 1- Phase

10 HP 3- Phase        7-1/2 HP 1- Phase

7-1/2 3- Phase          10 HP 1- Phase
Hydraulic System (Pump) 1200 PSI 1000 PSI 1700 PSI

1400 PSI
Hydraulic System (Oil Capacity) 10 Gallons 10 gallons 10 gallons

15.5 gallons
Overall Length 80" 107" 80"

132"
Overall Width 26" 28" 26"

47"
Overall Deck Height 32" 32" 32"

31-3/4"
Overall Height 72" 72" 72"

74"
Weight 4480 lbs 6050 lbs 4650 lbs.

10840 lbs.

E-Mail