Tennsmith Manual Rotary Machines
|
Model R22&R24 TENNSMITH Model R22 with interchangeable rolls is a versatile forming tool for the manual performance of numerous sheet metal operations. This tool features a solid cast, enclosed frame and smooth meshing machine gears. Material can be fed through the rolls in either direction by selecting the proper arbor. The forming pressure of the rolls is controlled by the crank on top of the frame. This unit comes standard with rolls A, C, D, E and F listed on the chart below, a hand crank, spanner and bench stand. Model R24: Tennsmith Model R24 provides simultaneous crimping and beading on 24-gauge and lighter materials. Spacer collars are provided with the machine to enable crimp-only operation. Optional extended ogee bead rolls are also available to configure the unit solely for beading. Standard equipment for the Model R24 includes ogee bead and crimping rolls, spacers, a hand crank, spanner and bench stand. |
|
| Model R22 | Model R24 | |
| Maximum capacity, mild steel | 22 gauge | |
| Throat | 7 in. | |
| Distance, shaft center to center | 2 in. | |
| Shipping weight | 67 lbs. | |
| Export crate | 2.14 cu. ft |
|
Roll Chart for R22 |
| Name | Part Number: | Roll Diagram |
| "A" 1/8" |
22100 22101 |
Turning |
| "C" | 22106 22107 |
Burring |
| "D" | 22108 22109 |
Wiring |
| "E" | 22110 22111 |
Crimping |
| "F" 3/4" |
22113 22114 |
Ogee Beading |
| "G" | 22115 22116 |
Single Beading |
Powered Rotary Machine
|
Model PR16 A.) The PR-16 power rotary is a versatile machine capable of forming numerous applications up to 16-gauge mild steel material. Standard features include variable speed control, heavy cast body with steel body stand. A 3/4-hp gear motor provides smooth operation. The forming pressure is controlled by a crank on the top of the frame on the standard unit; an optional hydraulic powered forming pressure unit is available. Rolls are ordered separately for this unit. Crimping, single beading, ogee beading, elbow edging, flattening, wiring, burring and turning rolls are available. Please contact the factory for special application forming. |
|
Rotary Machine |
Model PR- 16 |
| Maximum capacity, mild steel | 16 gauge |
| Maximum capacity, stainless steel | 20 in. |
| Throat Depth: | 10 in. |
| Distance, shaft center to center | 2.5 in. |
| Gear Ratio | 3 to 1 |
| Working Speed Variable | 3 to 45 RPM |
| Motor | 1/2 HP |
| Shipping Weight (lbs) | 350 lbs. |
| Export crate | 2.14 cu. ft |
Optional Accessories: Hydraulic Depth Selection, Flange, Combination Bead/ Crimp, Crimping, Flattening, Elbow Edging, Ogee Beading, Single Beading (1/4, 3/8, 1/2), Off Set
E-Mail
Phone: 1-888-988-7738 or Fax 513-527-4410
